Coat-rail brackets on slatwall, a pair holding a rail with coat hangers

Building…

Coat-rail brackets for slatwall

Not test-printed yetBuilding…

Colours

Puts this design back in its own colours. Designs you haven't coloured show their own colours too, until you pick new ones.

Set your own measurements

Settings

Tube diameter

Measure the tube you bought: 19.1 = 3/4 in, 25.4 mm = 1 in, 27 = 1-1/16 in retail hangrail, 33.4 = 1-5/16 in closet rod. The ring adds your printer fit

Rail distance from the wall

To the tube's centre, from the front of the mount. Hangers that hang square to the wall want the most; S-hooks and loops need 70-100

Bracket thickness

Also the mount width and the ring's length along the tube. 30 mm is the least for the rated load; thicker is stronger

Holds: Jacket & bag
Kind: Hang-rail brackets
Prints as: One piece
Needs: Dowel or rod

Print settings, already in the 3MF

Worked out from your setup once the part has built.

Coat-rail brackets

Holds: Jacket & bag

Prints as 1 piece

Turns a bought round tube into a hang rail for coats, aprons and laundry. The tube runs through a closed ring in each bracket, so it can't lift or roll out. Measure your tube, and print in PETG or ASA, not PLA.

CC BY 4.0 · Free

Not test-printed yet. Made with AI and checked against the rules on every wall, but no test print has confirmed it yet.

Walls it fits

VEVOR PVC slatwallFits · some wall sizes assumed · not test-printed yet
StoreWallFits · not test-printed yet
HandiwallFits · some wall sizes assumed · not test-printed yet
Trusscore SlatWallFits · not test-printed yet
Retail MDF slatwall, 3 inFits · not test-printed yet
Flow WallFits · some wall sizes assumed · not test-printed yet
Gladiator GearWallWon't fit: its slot opening is 17 mm, and the cam-lock mount needs a slot opening from 8.5 to 11 mm
ProSlat PVC slatwallWon't fit: ProSlat doesn't publish its slot. Measure your wall and use Custom

History

First published 8 Oct 2026 1.0.5

More for jacket & bag

Everything for jacket & bag ›