Skip to main content
Pick your wall
Create with AI
Double coat hook on a slatwall
Turn it in 3D

1 / 3Photo

Hooks & grippers

Double coat hook for slatwall

Hangs a jacket, bag or dog lead on a deep lower hook, and a cap or hat on a prong above.

Not test-printed yetBuilding…

Customize
Holds
Jacket & bag, Cap, Gloves & rags
Kind
Coat & loop hook
Prints as
One piece
Needs
Nothing to buy

Print settings, already in the 3MF

Worked out from your setup once the part has built.

Download

For Bambu Lab X1 / P1 / P2S / A1 · Bambu Studio · 4 colours · Standard fit ·

Print settings: supports automatic from the plate; key 75 % infill (change it in Your setup, under Fit).

File type

1 to 50 of the whole design, laid out on as many plates as your bed needs.

  • Filament 1 — Body, black
  • Filament 2 — Key, azure

PrusaSlicer and other slicers get one 3MF per plate; Bambu Studio and OrcaSlicer get one 3MF with every plate.

    Double coat hook

    Holds: Jacket & bag · Cap · Gloves & rags

    Prints as 1 piece

    Hangs a jacket, bag or dog lead on a deep lower hook, and a cap or hat on a prong above. Set the width, the coat hook's reach and tip, and the hat prong's length. Print in PETG or ASA for a garage; PLA is fine only indoors.

    CC BY 4.0 · Free

    Not test-printed yet. Made with AI and checked against the rules on every wall, but no test print has confirmed it yet.

    Walls it fits

    History

    1. 0.1.5

    More for jacket & bag

    Everything for jacket & bag ›