Skip to main content
Pick your wall
Create with AI
Spray-bottle rack on slatwall, holding two trigger spray bottles
Turn it in 3D

1 / 4Photo

Cleaning & garden

Spray-bottle rack for slatwall

Hangs one or two trigger spray bottles by the neck, just under the trigger.

Not test-printed yetBuilding…

Customize
Holds
Spray bottle
Kind
Spray-bottle rack
Prints as
One piece
Needs
Nothing to buy

Print settings, already in the 3MF

Worked out from your setup once the part has built.

Download

For Bambu Lab X1 / P1 / P2S / A1 · Bambu Studio · 4 colours · Standard fit ·

Print settings: supports automatic from the plate; key 75 % infill (change it in Your setup, under Fit).

File type

1 to 50 of the whole design, laid out on as many plates as your bed needs.

  • Filament 1 — Body, black
  • Filament 2 — Lock + key, azure

PrusaSlicer and other slicers get one 3MF per plate; Bambu Studio and OrcaSlicer get one 3MF with every plate.

    Spray-bottle rack

    Holds: Spray bottle

    Prints as 1 piece

    Hangs one or two trigger spray bottles by the neck, just under the trigger. Slide a neck in from the front; drips run off the front, not down the wall. Print in PETG or ASA: in PLA, two full 32 oz bottles are over its limit.

    CC BY 4.0 · Free

    Not test-printed yet. Made with AI and checked against the rules on every wall, but no test print has confirmed it yet.

    Walls it fits

    History

    1. 1.0.4

    More for spray bottle

    Everything for spray bottle ›