Skip to main content
Pick your wall
Create with AI
Safety-glasses rack on slatwall, holding a pair of glasses

Building…

Safety-glasses rack for slatwall

Not test-printed yetBuilding…

Download

For Bambu Lab X1 / P1 / P2S / A1 · Bambu Studio · 4 colours · Standard fit ·

Print settings: supports automatic from the plate; key 75 % infill (change it in Your setup, under Fit).

File type

1 to 50 of the whole design, laid out on as many plates as your bed needs.

  • Filament 1 — Body, black
  • Filament 2 — Key, azure

PrusaSlicer and other slicers get one 3MF per plate; Bambu Studio and OrcaSlicer get one 3MF with every plate.

    Safety-glasses rack

    Holds: Safety glasses

    Prints as 1 piece

    Holds one to six pairs of safety glasses, folded and hung by the bridge on short pegs. Each peg turns up at the end so a pair can't slide off; with four or more pairs, the top pegs take two each. Print in PETG or ASA, not PLA; it's rated 0.5 kg.

    CC BY 4.0 · Free

    Not test-printed yet. Made with AI and checked against the rules on every wall, but no test print has confirmed it yet.

    Walls it fits

    History

    1. 1.0.5

    More for safety glasses

    Everything for safety glasses ›