Skip to main content
Pick your wall
Create with AI
Power-strip cradle on slatwall, holding a power strip

Building…

Power-strip cradle for slatwall

Not test-printed yetBuilding…

Download

For Bambu Lab X1 / P1 / P2S / A1 · Bambu Studio · 4 colours · Standard fit ·

Print settings: supports automatic from the plate; key 75 % infill (change it in Your setup, under Fit).

File type

1 to 50 of the whole design, laid out on as many plates as your bed needs.

  • Filament 1 — Mount, black
  • Filament 2 — Lock + key, azure
  • Filament 3 — Cradle, graphite

PrusaSlicer and other slicers get one 3MF per plate; Bambu Studio and OrcaSlicer get one 3MF with every plate.

    Power-strip cradle

    Holds: Power strip

    Prints as 2 pieces

    Holds a power strip you buy face up on two arms, clear of its cord and switch. It drops in and lifts straight out, so hold it while you unplug. Enter the strip's length, width and height, and print in PETG or ASA, not PLA.

    CC BY 4.0 · Free

    Not test-printed yet. Made with AI and checked against the rules on every wall, but no test print has confirmed it yet.

    Walls it fits

    History

    1. 2.0.3

    More for power strip

    Everything for power strip ›