Multimeter pocket on slatwall, holding a multimeter

Building…

Multimeter pocket for slatwall

Not test-printed yetBuilding…

Colours

Puts this design back in its own colours. Designs you haven't coloured show their own colours too, until you pick new ones.

Set your own measurements

Instrument

Instrument width

Side to side, as it faces you on the wall

Instrument depth

Front to back, out from the wall, including any belt clip

Instrument height

Standing in the pocket; the pocket covers the lower part of it

Lock

Top wedge lock (not yet test-printed)

Not yet printed. Push the orange button on top of the ledge toward the wall to fill the gap above the arm, so the hook can't lift off. Pull it back out before tipping the hook in or out

Holds: Tape measure
Kind: Tape measure & caliper holder
Prints as: One piece
Needs: Nothing to buy

Print settings, already in the 3MF

Worked out from your setup once the part has built.

Multimeter pocket

Holds: Tape measure

Prints as 1 piece

Holds a tape measure, caliper, multimeter or laser measure in a pocket sized to fit it. The front is low, so you drop the tool in and tip it out with one hand. Print in PETG or ASA, not PLA; it's rated 1 kg.

CC BY 4.0 · Free

Not test-printed yet. Made with AI and checked against the rules on every wall, but no test print has confirmed it yet.

Walls it fits

VEVOR PVC slatwallFits · some wall sizes assumed · not test-printed yet
StoreWallFits · not test-printed yet
HandiwallFits · some wall sizes assumed · not test-printed yet
Trusscore SlatWallFits · not test-printed yet
Retail MDF slatwall, 3 inFits · not test-printed yet
Flow WallFits · some wall sizes assumed · not test-printed yet
Gladiator GearWallWon't fit: its slot opening is 17 mm, and the cam-lock mount needs a slot opening from 8.5 to 11 mm
ProSlat PVC slatwallWon't fit: ProSlat doesn't publish its slot. Measure your wall and use Custom

History

First published 8 Oct 2026 1.0.4

More for tape measure

Everything for tape measure ›