Skip to main content
Pick your wall
Create with AI
LED strip channel on a slatwall
Turn it in 3D

1 / 5Photo

Power & devices

LED strip channel for slatwall

Holds a bought LED strip under a shelf or above a bench in a channel that opens downward.

Not test-printed yetBuilding…

Customize
Kind
LED strip channel
Prints as
3 pieces
Needs
Nothing to buy

Print settings, already in the 3MF

Worked out from your setup once the part has built.

Download

For Bambu Lab X1 / P1 / P2S / A1 · Bambu Studio · 4 colours · Standard fit ·

Print settings: supports automatic from the plate; key 75 % infill (change it in Your setup, under Fit).

File type

1 to 50 of the whole design, laid out on as many plates as your bed needs.

  • Filament 1 — Mount, black
  • Filament 2 — Key, azure
  • Filament 3 — Channel, #3A3A3A
  • Filament 4 — Diffuser, #F2F2F2

PrusaSlicer and other slicers get one 3MF per plate; Bambu Studio and OrcaSlicer get one 3MF with every plate.

    LED strip channel

    Prints as 3 pieces

    Holds a bought LED strip under a shelf or above a bench in a channel that opens downward. The strip sticks inside and a diffuser slides in below it for softer light. Print in PETG or ASA, since strips run warm, and hang nothing else on it: it's rated 0.5 kg.

    CC BY 4.0 · Free

    Not test-printed yet. Made with AI and checked against the rules on every wall, but no test print has confirmed it yet.

    Walls it fits

    History

    1. 1.1.4

    More power & devices

    All power & devices ›