Helmet holder on slatwall, holding a bike helmet

Building…

Helmet holder for slatwall

Not test-printed yetBuilding…

Colours

Puts this design back in its own colours. Designs you haven't coloured show their own colours too, until you pick new ones.

Set your own measurements

Size

Width

Across the wall: the mount, the arm and the head

Arm length

From the wall to the back of the head. Longer suits deeper helmets

Arm tilt

Tips the arm up so the helmet can't slide off

Head

Head height

Fills the helmet's crown; 64 mm suits most adult bike helmets

Holds: Helmet
Kind: Helmet holder
Prints as: One piece
Needs: Nothing to buy

Print settings, already in the 3MF

Worked out from your setup once the part has built.

Helmet holder

Holds: Helmet

Prints as 1 piece

Hangs a bike, ski, climbing or work helmet on a short tilted arm. A rounded pad sits up inside the crown, so the helmet slides on and lifts off with one hand. Not for motorcycle helmets; print in PETG or ASA, not PLA.

CC BY 4.0 · Free

Not test-printed yet. Made with AI and checked against the rules on every wall, but no test print has confirmed it yet.

Walls it fits

VEVOR PVC slatwallFits · some wall sizes assumed · not test-printed yet
StoreWallFits · not test-printed yet
HandiwallFits · some wall sizes assumed · not test-printed yet
Trusscore SlatWallFits · not test-printed yet
Retail MDF slatwall, 3 inFits · not test-printed yet
Flow WallFits · some wall sizes assumed · not test-printed yet
Gladiator GearWallWon't fit: its slot opening is 17 mm, and the cam-lock mount needs a slot opening from 8.5 to 11 mm
ProSlat PVC slatwallWon't fit: ProSlat doesn't publish its slot. Measure your wall and use Custom

History

First published 8 Oct 2026 2.0.2

More for helmet

Everything for helmet ›